Mirror glass, also known as polished glass, is made of flat glass after polishing glass, single-sided polished and double-sided polished two, smooth and shiny surface. Light transmittance greater than 84%, thickness of 4mm-6mm.
From the side of the glass can see through the opposite of the scene, and from the other side of the glass is simply not see the opposite of the scene, it can be said in this side he is not eyesight.
Ordinary glass is equal to the glass on the mirror, mirror glass film is equal to the mirror after the silver, but it must have a prerequisite for reflection of light, that is, outside the light than the inside of the light, otherwise they can not see the reflected light. Car film glass, sunglasses and other basic are this thing.
Usually in the ordinary glass above the layer of film, or color, or in the thermoplastic molding in the inside if some metal powder, so that both through the light source of light can also reflect the reflection of the inside of the light out The
Mirror glass installation process: clean up the base layer of the nail liner liner glass
1. Clean the grassroots: in the masonry wall, the pre-buried curtain, the location should be corresponding to the vertical horizontal size of the mirror, the general spacing of 500mm is appropriate, the base plaster to brush waterproof material, but also in the Glass and wood lining between a layer of waterproof layer, to prevent moisture deformation of the wood liner, or mirror coating off.
2. Vertical tendons: 40mm 50mm wooden side, fixed with nails in the wood keel, fixed to pay attention to horizontal and vertical, so that the liner and mirror fixed.
3. Pavé liner: 15-thick board or 5 thick plywood, nailed to the wall of the nail must be into the board, the plate and the plate gap in the vertical bar at the board should be no warping, smooth and clean The
4. Mirror installation: the mirror size and shape according to the design of the cut, to be fixed, commonly used methods are fixed screws, inserted nails fixed, fixed bonding, pressing pressure and bonding support fixed.
Grinding the base layer is an important process of brushing varnish, should first dust on the surface of wood, oil and other impurities removed clean. On the oil powder is also an important process of varnish brushing, construction with cotton silk dipped in oil powder applied to the surface of the wood, rub back and forth by hand, the oil into the wood within the eyes. Brush the oil, the hand oil brush to be easy and natural, fingers gently force to move when not loose, do not brush as the standard. Brushing in accordance with the dipped in more than one, each time less dipped in oil, the operation of the ground, Shun brush requirements, in accordance with the first on the next, first difficult after the first, left after the right, the first outside the order and horizontal brush Vertical operation method construction.
Base treatment, in addition to clean up the grass-roots debris, but also should be part of the putty embedded, playing sandpaper should be polished along the wood grain. In the brush before the surface layer, the application of paint (shellac paint) on the larger color and lime of the knives at the back cover. Should be in the grass-roots coating of dry oil or clear, brushing dry oil to all parts of the brush evenly, can not leak brush. Base oil dry, full scratch the first pass putty, dry sandpaper after hand grinding, and then make up high-strength putty, putty to pick the wire does not prevail. When brushing the surface paint, it should be polished with fine sandpaper.
Advanced silver mirror glass (ie, mirror glass), is the use of advanced mirror technology, select the special float glass for the original film, silver, sensitized, copper and coated protective paint and a series of processes made.
It is characterized by pure image, high reflectivity, good color reproduction, beautiful image natural, even in the damp environment, but also durable, is the replacement of aluminum products. Its use is also far beyond the aluminum mirror products.